The Fluke TS® 19 Test Set is a basic yet rugged telephone line tester (butt-set) tailored to telecommunications technicians who require a dependable, no-frills tool to make calls and monitor analog lines. Favored for its simplicity and durability, the TS19 is well-suited for field environments where robustness matters most. Explore the networking equipment at Pico Labs Limited where will get the reliability and accuray for your precision work.
Pricing for the Fluke TS19 Test Set in Bangladesh depends on the importer, customs duties, and local markup. Here is a general range based on existing market patterns:
| Item | Comments |
|---|---|
| Fluke TS19 Test Set | Reflects typical landed cost for imported units, including duties and shipping. |
Note: These figures are indicative. Actual prices may vary depending on the vendor, stock condition, import charges, and warranty terms.
For telecom professionals in Bangladesh looking for a sturdy, simple, and budget-friendly line tester, the Fluke TS® 19 Test Set remains a strong candidate. It is accessible yet reliable for daily fieldwork. Whether for maintenance teams, installation crews, or network technicians, the TS19 provides essential functionality without unnecessary complexity.
Loop Limit: 2.4 kΩ maximum @ 48 V DC (≈15 mA min loop current)
DC Resistance (Talk Mode): ~150 Ω at 80 mA
AC Impedance (Monitor Mode):
Low impedance (Ring): ~600 Ω @ 1 kHz
High impedance (HI Z): ≥100 kΩ @ 1 kHz
Rotary Dial Output:
Pulsing rate: 10 pps ±0.5 pps
Break: 60% ±2%
Interdigit interval: typically 800 ms
Leakage during break: > 50 kΩ
DTMF Output:
Tone frequency error: ±1% max
Level per tone pair: +2 dBm max, –8 dBm min
Difference high vs low tone: ≤4 dB
Length: 8.75 in (22.2 cm)
Width: 2.375 in (6.03 cm)
Height: 3.375 in (8.57 cm)
Weight: max 10.8 oz (0.307 kg)
Operating Temperature: –5 °C to +40 °C
Storage Temperature: –40 °C to +66 °C
Drop Test: 1 m, 4 drops
Altitude: up to 3,000 m (10,000 ft)
Humidity: 10%–80% RH, non‑condensing
Complies with:
47 CFR 15B, ICES‑003, AS/NZS 3548
EMC Directive 89/336/EEC (EN 55022, EN 61326, EN 61000‑4‑2/3)
Low‑Voltage Directive 73/23/EEC (EN 61010‑1)
Certified under CSA‑C22.2 No. 60950‑1‑03, CSA‑C22.2 No. 1010.1‑92/B‑97, UL/ANSI 3111‑1