Bearing and Mechanical Inspection

Bearing and mechanical inspection is an important process in Bangladesh, which helps to ensure the functionality and durability of mechanical equipment and components. Ensuring the proper quality of bearings is very important, especially in industrial establishments, because bearing problems or defects can reduce the performance of the equipment and cause major accidents. Mechanical inspection is used to check the health of equipment, such as bearings, pumps, motors, etc., and identify whether there are any problems or damage to them. This inspection is carried out regularly in various industrial sectors of Bangladesh, so that there is no disruption in production activities and long-term performance is maintained.

Service Name Field of Test Required Equipment
Bearing and Mechanical Inspection Bearing Condition Monitoring and Diagnostics Test Vibration Tester
Measurement range: -10 …80 dBsv / ± 3dBsv
Frequency range DC … 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range 96 dB (measurement) / 136 dB (total)
Sampling frequency up to 131 kHz per channel
Impedance 90 kOhm
Analog, Temperature, 1x
Thermocouple (type K)
Digital, Pulse/ Tacho, 1x RPM, Trigger, Keyphaser with pulse and AC signals: 0 V … +26 V or -26 V … 0 V
Max. input voltage ± 26 V
Switching threshold for 0 V …+26 V signal max. 2.5 V rising, min. 0.6 V falling
Switching threshold
for -26 V …0 V signal
min. -8 V rising, max. -10 V falling
Pulse width < 0.1 ms
10 … 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower
accuracy is applicable)
Temperature, type K -50 … +1000°C / 1% or ±1°C (the lower accuracy is
applicable)
Bearing Alignment and Misalignment Detection Laser Shaft Alignment Tester
Measurement principle: Coaxial, reflected laser beam
Laser Type: Type: Ga-Al-As semiconductor laser
Wavelength (typical) 675 nm (red, visible)
Bearing Temperature Monitoring and Analysis
Bearing Wear and Tear Analysis
Bearing Vibration Analysis
Mechanical System Vibration Testing
Torque and Force Testing

Appoint Now